NUFLO MC-II Flow Analyzer

Go Back

The NUFLO™ MC-II™ Flow Analyzer provides separate, continuous digital displays of flow rate and accumulated flow based on input from a turbine flowmeter. The low current consumption of its liquid crystal displays and CMOS microprocessor based circuitry enable years of dependable performance from a single lithium battery. Typical battery life is 3 to 5 years. Totalizer readings can be made in any desired volumetric units, and flow rates can be measured in units per second, minute, hour, or day. Rate and total are quickly and easily calibrated using the keypad on the front of the MC-II. The instrument is suitable for outdoor installation and requires no additional protection from the weather. The unit may be mounted directly on the turbine meter or attached remotely.


  • Size: 7.3-in. wide x 8.3-in. high x 3.4-in. deep
  • Weight: 6 lb including shipping container
  • Power supply: One 3.6 volt lithium battery
  • Current consumption: 200 microamps typical
  • Temperature range: -40 to +140°F; -40 to +60°C
  • Totalizer and flow rate display: Six digits
  • Divisor or calibration factor range: 0.001 to 999,999
  • Standard units: bbl and bpd (other units available)
  • Accuracy: +/- 1 count (totalizer)
  • Input frequency: 0 to 3,500 Hz
  • Input amplitude: 30 to 3,000 mV peak to peak

Technical Specification Data Sheet

Popular Products

  • 01Cameron NuFlo EZIN Flowmeter
  • 02Cameron NuFlo MC-III TFM Totalizer
  • 03Cameron NuFlo Scanner 2000 Micro Flow Computer
  • 04Cameron Barton Mechanical Chart Recorder
  • 05Valtek Sulamericana GXL Control Valve
  • 06Oliver Valves Instrument Manifold
  • 07Oliver Valves Double Block & Bleed Valve